Filter
Top Products
61
Inter-Tel
®
Model 8500 User Guide
MOVING ON
PROGRAMMING REMOTE FEATURE ACCESS
If you are away from your desk and forgot to put your endpoint in DND, don’t worry.
With the Remote Feature Access, you can place your endpoint in DND or forward
calls from any other endpoint on the system. And, if you have a special dial-up line,
you can access your endpoint features from an outside line.
NOTE: For your convenience, a pocket-sized guide of the Remote Feature Access is
located in the front of this guide.
Remote Access Password
Before you use Remote Feature Access, you should program a password, as described
below.
To change the password from your endpoint:
1. Dial .
2. Enter your current password, followed by .
NOTE: Your extension number is your password at default.
3.
Enter the new password followed by . You hear a confirmation tone.
4. Enter the new password again for verification followed by . You hear a con-
firmation tone.
To change the station password using remote programming, see Remote Feature
Access.
3 9
2
#
#
#