Filter
Top Products
4
Inter-Tel
®
Model 8500 User Guide
FINDING YOUR WAY
Feature Button Functions
The feature buttons are designed to automate some of the commonly-used functions,
such as dialing an outside number. Each of these is described in the table below.
In addition to the buttons identified in the preceding table, your endpoint has a Spe-
cial button ( ). Depending on how your telephone system is configured, you may
need to press this button before you dial a feature code.
NOTE: Because the telephone system allows customized feature buttons, your end-
point may have been reprogrammed so that the feature buttons do not match those
described in this guide.
BUTTON IF YOU... YOU CAN... PG.
Press Answer a call. 19
Press and dial the number Place an outgoing call. 18
Press an unlit button or the flash-
ing button
Select an outside line or answer a call. 18, 19
Press Access an intercom call. 16
Press unlit or lit Enable/disable Do-Not-Disturb mode. 38
Press
and dial the numbers you
would like to add to the conference
Place a conference call. 21
Press
(International Hold Symbol) Put a call on hold. 20
Press and dial the destination
number
Transfer a call. 22
Press Access System Speed-Dial numbers. 53
Press Access Station Speed-Dial numbers. 51
Press Choose a page zone to place a page. 54
Press Redial a telephone number or save the
last number dialed.
25
Press
and hang up Put a call on the speaker. 27
Press Leave or listen to a message. 29
Press Mute the microphone. 27
Press
and dial the destination
number
Forward calls to the specified number. 24
Press the high or low end of the volume
button
Adjust volume during a call. 42
ANSWER
ANSWER
OUTGOING
OUTGOING
CALL
CALL
IC
IC
DND
DND
CNF
CNF
TRANSFER
TRANSFER
SYS SPDL
SYS SPDL
STN SPDL
STN SPDL
PAGE
PAGE
REDIAL
REDIAL
MSG
MSG
MUTE
MUTE
FWD
FWD