Filter
Top Products
Star Codes
60 System Telephone Features Linksys SPA-941 Telephone User Guide
620-05600390
Identifying the Number Assigned to a Speed Dial key
To view the currently assigned speed dials on your phone, do the following:
1. Press the Settings ( ) key.
2. Use the scroll down arrow key to highlight option number 2, Speed Dial .
3. Press the select softkey below the phone display.
4. Use the scroll key to highlight or view the assigned speed dials.
5. Press the cancel softkey twice to revert to the main display.
Deleting a Speed Dial Number
To delete one of your speed dials through the phone menu, do the following:
1. Press the Settings ( ) key.
2. Use the scroll key to highlight option number 2, Speed Dial .
3. Press the select softkey below the phone display.
4. Use the up and down scroll key to highlight speed dial to be assigned.
5. Press one of the following softkeys:
• edit - to add or edit the selected speed dial information
• cancel - to exit the speed dial list
6. If you selected edit, then press the More key once.
7. Press the clear softkey to clear the speed dial.
8. Press the More key until you see the ok softkey.
9. Press the ok softkey to save the changes.
10. After you have made the desired edits, press the cancel softkey twice to
revert to the main display.
Star Codes
The codes used by analog DTMF users to activate features (commonly referred to
as "star codes") are also supported for IP phones. By pressing the pound or star
button on the telephone and entering the proper code, you can make use of these
codes for feature use.
The feature must be active at your phone for it to be accessed from the star codes
(that is, you can't use features that aren't turned on) and some caution should be
used when activating features from star codes, since they may not be reflected in
display messages or lamp activity on the telephone.