Filter
Top Products
Dial Tone and Ringer Patterns
30 System Telephone Features Linksys SPA-941 Telephone User Guide
620-05600390
2. Press the conf soft key.
3. Dial the number of the person that you want to include in the conference and
press the dial soft key.
4. When the person answers, inform the party about the conference and then
press the conf button to add that party into the conference call.
5. Repeat steps 1-3 to add additional parties to the conference.
Conference Call Tips
• The parties connected to the conference call remain connected to each
other while you add additional parties. They may carry on a conversation
with each other while you finish adding parties to the conference.
• Even if the call initiator disconnects, any of the other parties (who have
the conference feature) can use it to add new parties.
• To place a conference call on hold, press the Hold button. The other
parties can talk among themselves but they can’t hear you.
• When you put the call on hold, a beeping tone automatically sounds every
few seconds. To avoid disrupting the other callers, consider muting the
call instead. To mute the call, press the Mute button.
• To transfer a conference call to another telephone, press the xfer soft key.
Dial the number to which you want to transfer the call and then press xfer
key again.
Dial Tone and Ringer Patterns
The FrameMaker telephone system generates different ringer and dial tones,
depending on call conditions.
There are two types of dial tone:
• Internal Dial Tone – A continuous, higher-pitched tone
• External (Outside) Dial Tone – A continuous, lower-pitched tone
There are several types of ringers – all are answered the same way:
• One Ring – Internal (Extension-to-Extension) Calls and when the system
has called your extension to remind you or to notify you about something.
• Two Rings – External Calls
• Distinctive Rings – A different ring tone is provided for up to two
additional Direct Inward Dial (DID) numbers assigned to your telephone
by the system administrator. These numbers do not appear as lines on
your telephone, but ring your prime line with the appropriate ring when
they are dialed.