Linksys SPA-941 IP Phone User Manual


 
Disabling Call Forward (Busy)
Linksys SPA-941 Telephone User Guide System Telephone Features 23
620-05600390
Disabling Call Forward (Busy)
1. Press 77* on the telephone keypad.
2. Press the dial soft key.
3. Call forwarding (all) is disabled and the phone hangs up.
Call Forward (No Answer)
Call Forward (No Answer) allows you to forward calls that are unanswered at your
phone (when the phone is not being used) to the number you enter.
NOTE: If you are on a call and another call comes to your phone, the phone is considered
busy. If the second call is not answered, it will follow the Call Forward - Busy
treatment.
Calls forwarded to an external number (7 or more digits) that are unanswered will
roll over to voice mail (if available) at that number. Calls forwarded to an internal
number (less than 7-digit extension) that are unanswered will roll over to voice mail
(if available) for the called party or the forwarding destination, depending on the
system configuration.
External forwarding must be supported by your system for external numbers to be
accepted. Be sure to include the access code for an outside line and the area code,
if necessary, with the external number. Up to 20 digits may be entered.
Enabling Call Forward (No Answer)
NOTE: The display will show the available options as the prompts are played. Depending
on available space on the display, the final entry (usually * for re-enter or exit) may
not appear completely.
1. Press 78* on the telephone keypad and press the dial soft key.
If you do not have a previously configured forward number, you will be
instructed to enter a forwarding number and press #.
If you previously configured a forwarding number, you will be instructed
to do one of the following:
Press 1 to enable forwarding. Go to step 8.
Press 2 to change the current forwarding number. Go to step 2.
2. Enter the number to which you want to forward your calls when the phone is
unanswered. Be sure to enter the number exactly as you would if you were
to call that number. Include the area code, if necessary.
3. Press #.