Filter
Top Products
Hanging Up
6 Basic Phone Features Linksys SPA-941 Telephone User Guide
620-05600390
Hanging Up
To hang-up the phone, use one of these options:
• Replace the handset in its cradle.
• Press the line key and replace the handset.
• Press the Headset ( ) key (if using a headset).
• Press the Speaker ( ) key (if using the speakerphone).
Line Indicators
The numbers assigned to each of the line keys on the Linksys phone appear on the
LCD display. Each line key has a light indicator that indicates the state of the call
on the line:
• Solid green – the line is free with no active calls.
• Solid red – there is an active call on the line.
• Blinking red – a call is incoming or there is a call on hold. Press the
blinking line key to pick up the call.
Making an External Call
Several options exist for you to make an external call from your telephone. You
may use any of the following options: the handset (traditional), a headset attached
to the phone, the speakerphone, or the keypad (direct dialing).
1. Optionally lift the handset, press the Speaker ( ) key, or if using a headset,
press the Headset () key.
2. Enter the desired number that you wish to call. Press 9 (or the digit that is
required to access an outside line) plus the desired number.
NOTE: If you make a mistake in typing the number, you can press the delChr softkey to
re-enter the digits.
3. Press the dial softkey.
Making an Internal Call
1. Optionally lift the handset, press the Speaker ( ) key, or if using a headset,
press the Headset () key.
2. Enter the desired extension (e.g., 1105).
3. Press the dial softkey.