Filter
Top Products
In This Manual
Linksys SPA-941 Telephone User Guide Your Linksys SPA-941 Telephone 3
620-05600390
Moving Your Telephone
Before moving your telephone, you should check with your system administrator to
make sure that there is power for the telephone at the new location. You need a
power adapter for your phone at the new location as well.
To move your phone, follow these steps:
1. Unplug the telephone from the LAN connection jack and the power adapter
from the wall.
2. Take the telephone to the new location.
3. Plug the telephone into the LAN connection jack and the power adapter into
a wall outlet.
4. Watch to ensure that the phone registers and boots up properly. If it does not,
contact your system administrator.
Scroll Key and “More” Key The buttons allow the user to scroll up and down menu
items on the display. Pressing the right side of the
button provides “More” information/additional choices
for the menu options shown on the display
Voice Mail Acts as a speed dial to the user’s voice mail.
Hold Places the call on Hold. The Line button for the call that
is on hold will be flashing red while the call is on hold.
To resume the held call, press the blinking Line button.
Settings Allows user to access menu options for viewing and
modifying the phone configuration.
Mute Mutes the active audio input/microphone so that the
called party cannot hear local audio. The Mute button
will light red when the call is muted.
Volume Allows the user to adjust the ringer, handset, headset
and speaker volume.
Headset This button toggles the headset function on and off and
takes the phone offhook or hangs up the phone. The
button turns green when the headset is being used.
Speakerphone Turns on and off the speakerphone and takes the
phone offhook or hangs up the phone. The button turns
green when the speakerphone is being used.
Numeric Keypad Press the keypad buttons to dial a phone number.
Features Descriptions