Filter
Top Products
Call Waiting
28 System Telephone Features Linksys SPA-941 Telephone User Guide
620-05600390
Your phone number and the caller ID of the offending caller is recorded in the
phone system’s Call Data Record (CDR). Check with your service provider to
retrieve the phone number of the traced call from the CDR. Note the time and date
that you traced the call, as this will help the system administrator find the call in the
CDR file.
Call Waiting
If your phone is configured with Call Waiting, you can answer an incoming call
without disconnecting from the current call.
If a call comes in while you are on the phone, you will hear a single beep repeated
approximately every ten seconds.
NOTE: If your phone is configured to be part of a Hunt Group, it will skip to the next phone
in the hunt group before you will be able to pick up the second incoming call.
Answering the Second Call
To answer a second call without ending the current call, press the red blinking line
key. The first call is automatically placed on hold and you are connected to the
incoming call.
Switching Between Held Calls
To switch between calls, press the red blinking line button. The other line will
automatically be put on hold.
Suspending Call Waiting
You can suspend Call Waiting just for the next call by entering *70 and then
entering the number you wish to call. Any subsequent call coming in will go directly
to your voice mail or other specified “no answer” destination. Call Waiting will be
enabled again when you disconnect from the call.
Call Waiting with Caller ID
If you have both the call waiting and caller ID capabilities, you can see the caller ID
of a call waiting call on your telephone's display.