Filter
Top Products
Retrieving a Parked Call
Linksys SPA-941 Telephone User Guide System Telephone Features 33
620-05600390
Intercom Calls (Receive Only)
Incoming Intercom calls are announced by a brief dial-tone followed by the
intercom tones. A tone is played every 60 seconds during active intercom calls.
Picking Up a Parked Call
This feature lets you pick up a specific parked call from a group of parked calls.
When parked, a call is assigned an ID number by the system. Using the parked call
ID, you can pick up the parked call from anywhere in the system.
NOTE: The Cisco 7902G telephone does not allow calls to be parked. The phone can
only be used to retrieve parked calls.
Retrieving a Parked Call
NOTE: You can retrieve parked calls using any phone in the system.
1. Pick up the handset or press the speaker button (if available).
2. Dial the call ID number of the parked call you wish to retrieve.
3. Speak with the parked caller.
Meet-Me Conference
If supported by your system, Meet-Me Conferencing provides the ability to
schedule conference calls where the moderator (who has control of the
conference) and other members (internal or external) call into the conference and
are connected at the appropriate time to carry on the conference call.
Moderators can do any of the following:
• Schedule a conference
• Cancel a conference
• Modify a conference
• List all conferences
Check with your system administrator to find out if you are authorized to schedule
Meet-Me Conferences. The default internal access number is 523, but check with
your system administrator if the default does not work for your system. If a DID
number was created for outside access, you can dial in from an external telephone
to schedule Meet-Me Conferences. Your system administrator can provide you
with the external access number.