Filter
Top Products
Page 84
System Hardware
AXXESS
®
ADMINISTRATOR’S GUIDE – January 2004
Inter-Tel Phones
Default Inter-Tel Phone Feature Buttons
When the system is in the default state, all phones are in the same keymap group and have the
following feature buttons. Feature code descriptions start on page 116. (The Special button is
represented by keycaps with on the Inter-Tel phone.)
KEY FUNCTION
CALL KEYS 1-4
Selects an outgoing trunk, if idle, or answers a call on the button.
IC
Selects a voice channel or picks up a holding or camped-on intercom
call.
DND
Programmable button 1: Do-Not-Disturb On/Off (372)
PROGRAMMABLE
KEYS 2-6, 14-16, 18,
and 21-35
Undefined values. Can be programmed with any feature code, trunk
access code, or extension number, or can be programmed as a sta-
tion or system speed-dial bin.
CNF
Programmable Button 7: Conference (5)
HOLD
Programmable Button 8: Individual Hold (336)
TRANSFER
Programmable Button 9: Transfer to Ring (345)
SYS SPD
Programmable Button 10: System Speed Dial (381)
REDIAL
Programmable Button 11: Redial (380)
PAGE
Programmable Button 12: Page (7)
QUEUE
Programmable Button 13: Queue Request (6)
MUSIC
Programmable Button 17: Background Music (313)
PAGE ZONE 1
Programmable Button 19: Selects Page Zone 1 for making a page.
STN SPEED DIAL
Programmable Button 20: Station Speed Dial (382)
FWD
Call Forward All Calls (355) Also used for canceling Call Forward.
SPECIAL
Signals the system to expect a feature code.
ANSWER
Answer (351)
OUTGOING
Selects a trunk for placing an outgoing call using the station’s Outgo-
ing Call feature (8).
SPEAKER
Speakerphone On/Off
MSG
Message (365) – Also retrieves messages when the flashing MSG
button is pressed.
MUTE
Microphone Mute On/Off (314) (This is a fixed-function button on Digi-
tal Phones.)
DATA
Data (340)
STATION SPEED DIAL
KEYS 0-9
Used for storing and dialing one station speed-dial number each.
UNDEFINED
Some Analog Phones have several undefined buttons that can be
programmed as desired.
∞