Filter
Top Products
Page 124
System Features
AXXESS
®
ADMINISTRATOR’S GUIDE – January 2004
Administrator Feature Codes
The Diagnostics Mode feature code (9900) must be entered at the administrator’s station to
enable system diagnostic mode before these feature codes can be used:
Program System Speed Dial 9801 Programs system-wide speed-dial numbers when followed
by location codes (000-999).
Set Network Date/Time 9810 Programs the time and date for all nodes in the system.
(Local time and date can also be reset by individual nodes.)
Set Time/Date 9800 Programs system time and date
Synchronize Network Time 9811 Synchronizes the minutes past the hour across the network.
NOTE: If a node's time is off by more than 30 minutes, syn-
chronizing the minutes may cause the hour to change. Also,
network time is automatically synchronized every day at
12:30 AM (00:30), using the time setting on the node with
the lowest number.
FEATURE NAME CODE DEFINITION
FEATURE NAME CODE DEFINITION
Diagnostic - ASAI Snoop Off 9926 This feature code turns off the ASAI output to Message
Print. ASAI is the protocol the system uses to talk to Data-
base Programming and the AVDAP. Turning this feature on
helps the Inter-Tel Engineers debug the messaging
between Call Processing and Database Programming or
Call Processing and the AVDAP.
Diagnostic - ASAI Snoop On 9927 This feature code turns on the ASAI output to Message
Print. ASAI is the protocol the system uses to talk to Data-
base Programming and the Voice Processor. Turning this
feature on helps the Inter-Tel Engineers debug the mes-
saging between Call Processing and Database Program-
ming or Call Processing and the AVDAP.
Diagnostic - Heap Dump 9943 This is used by Inter-Tel software developers and cannot
be used in Beta or Production software.
Diagnostic - Dump Extension 9933 Allows an Inter-Tel field technician to dump out a device or
structure when debugging a problem. The system dumps
the internal data structures for that extension to message
print. If you press the pound button (#) you are prompted
for a command. The command allows you to enter an
alphanumeric string of the structure to dump.