Filter
Top Products
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUALOCTOBER 1997
Page 16 of 73
OS/2 And NT Versions of AXXESSORY
Talk
There are now two versions of AXXESSORY Talk that
are compatible with the 4.3 software release. One ver-
sion runsunder OS/2 and the other runs under Windows
NT Workstation 4.0.
The OS/2 version has two major changes from the pre-
vious release:
•
Fax Delivery Report now indicates failed deliver-
ies (see page 23)
•
Programming Fax-On-Demand Port availability
(see page 33)
The Windows NT version includes several new fea-
tures:
•
Fax Delivery Report indicates failed deliveries
(see page 23)
•
AXXESSORY Talk VisualMail (see page 24)
•
Automatic Fax Detection to transfer to an exten-
sion number or to forward the fax to an E-mail ad-
dress (see page 31)
•
Programming Fax-On-Demand Port availability
(see page 33)
•
Voice Mail Save/Restore to a Network drive (see
page 34)
NOTE: The AXXESSORY Talk database is compat-
ible in both versions. This means that a customer that
has the OS/2 version can switch over to the Windows
NT version (or vice versa) and simply copy the data-
base files from one version to the other. All mailbox
configurations (messages, timers, etc.), will have the
same programming as in the other version.
Windows NT PC
Because the new Windows NT-based PC is somewhat
similar in design and function to the original
OS/2-based PC, only the differences are noted in this
addendum. For all other specification and installation
information, refer to the Issue 4 AXXESS Installation
and Field Maintenance Manual.
The part numbers for the new system are as follows:
NT PC Upgrade Unit
550.5220
NT 4-Port PC 550.5221
NT 8-Port PC 550.5222
NT 12-Port PC 550.5223
NT 16-Port PC 550.5224
NT 24-Port PC 550.5225
NT 32-Port PC 550.5226
NOTE: Installers must provide Inter-Tel with proof of
Windows NT certification to purchase the new voice
mail PC or to receive Technical Support assistance.
Specifications
The Windows NT-based AXXESSORY Talk PC is
equipped with the following items:
•
Microsoft Windows NT Workstation version 4.0
operating system software (equipped with Service
Pack 3)
•
Pentium 133MHz (or higher) microprocessor
•
32MB (or more) RAM
•
1.2GB (or larger) hard disk drive
•
3.5-inch (1.44MB) double-sided/high-density
floppy disk drive
•
CD-ROM
•
Network Interface Card
•
Standard VGA monitor, keyboard, and mouse
The Network Interface Card (NIC) is a specially de-
signed network communications processor card that
can transfer data packets between the AXXESSORY
Talk PC and a Local Area Network (LAN).
The RJ45 connector on the Network Interface Card
connects to the LAN via a customer-provided standard
network interface cable.
Hardware Installation
The chassis and motherboard used in the NT-based PC
are slightly different than the chassis and motherboard
used in the OS/2-based PC. See Figures 3 and 4 on
pages 21 and 22 for sample diagrams. For all other
hardware installation information, refer to the Issue 4
manual.
Windows NT Installation
The NT-based AXXESSORY Talk PC is shipped with
Windows NT Workstation (version 4.0 with Service
Pack 3) already installed and properly set up. If neces-
sary, Windows NT can be re-installed using the instruc-
tions outlined in Microsoft’s installation manual, while
observing the items listed below:
• Use FAT file allocation rather than NTFS