Filter
Top Products
Using Wi-Fi (not available on all models)
User’s Guide 8–16
4. Tap the Retrieve Certificate button to download the
certificate from the server. The status box at the bottom of
the screen will indicate whether the attempt to retrieve the
certificate was successful.
Note: The enrollment tool is specifically designed to interact
with Microsoft Certificate Servers. Alternate Certificate
Authority servers will require a custom enrollment application
which can be developed using the Embedded Visual C 4.0 tool
and the Software Development Kit for Windows Mobile
2003-based Pocket PCs.
LEAP Registration Utility
Cisco Lightweight Extensible Authentication Protocol (LEAP) is
an 802.1X authentication protocol that uses a username and
password pair to authenticate access by a wireless client to a
wireless router.
Use of the LEAP registration utility is required to log on to a
LEAP-authenticated network. Most of the other types of secure
networks are set up automatically by the HP iPAQ Wi-Fi
connection software. However, accessing a LEAP-authenticated
network requires initial registration using this utility. Once you
have authenticated and accessed this type of network, a
connection can take place automatically whenever you access the
LEAP-authenticated network.
To register the LEAP utility:
1. Tap Start > Settings > Connections tab > LEAP.
2. Tap New to create a LEAP profile. A LEAP profile must
contain the following information:
❏ SSID
❏ Username
❏ Password
❏ Domain