Filter
Top Products
Chapter5 | Sending and receiving e-mail | 61
• your e-mail password (this may be the same as the password
for your ISP account)
• the POP3 host name of your ISP
• the SMTP host name of your ISP (if required by your ISP)
Setting up a dial-up connection to your ISP
After you have established an account with an ISP, you can set
up a connection on the HP Jornada and send and receive e-mail
whenever you want.
To set up a dial-up connection
1. On the Start menu, tap Programs, tap
Communication, and then tap Connections.
2. In the Connections folder, double-tap Make New
Connection, and type a name for the connection.
3. In the Make New Connection dialog box, select Dial-
Up Connection, and then tap Next.
4. Select the down-arrow button next to the Select a
modem box, and highlight the name of your modem.
If you do not see your modem listed in the drop-down
list, your modem may not be properly connected to your
P/PC. Make sure that the modem is connected to your
P/PC properly, based on the installation instructions
that came with the modem.
5. Tap Next and fill in the phone number you wish to dial.
Tap Finish. A new icon appears with the name you
specified in the Connections folder. This connection
also appears on the Start menu in the Connections
submenu.
Connecting to your ISP
After you have configured your connection to your ISP, you are
ready to connect your phone line to your modem, and then dial
in. Make sure you connect to the phone line supported by your
modem, follow the instructions provided by the manufacturer.
Most CompactFlash Card modems use analog phone lines.