Filter
Top Products
42 Hewlett-Packard Jornada 420 Palm-size PC
• VGA or higher resolution graphics card (SVGA 256-color
recommended)
To install Windows CE Services
1. If you want to upgrade to Microsoft Outlook 98, install it
first.
2. Insert the Desktop Software for Microsoft Windows CE
compact disk into the CD-ROM drive on your desktop
PC.
3. The Windows CE Services Setup Wizard should start
automatically. If it does not start, click Run on the
Start menu, and then type d:\setup, where d is the
letter assigned to your CD-ROM drive.
4. Follow the instructions that appear on your screen to set
up Windows CE Services.
5. The Windows CE Services Get Connected dialog box
appears and prompts you to connect the HP Jornada.
• If you connect using the sync cable, connect your
P/PC as described in “Connecting by sync cable” on
page 42, and then click Start.
• If you connect by infrared, click Cancel, and skip to
“Connecting by infrared” on page 48.
If you chose Manual synchronization, you need to tap Start,
tap Programs, tap Communication, and then tap PC Link.
Connecting by sync cable
The HP Jornada uses a serial connection to communicate with a
desktop PC. The serial connection is established with the sync
cable (included with the HP Jornada) and a 9-pin serial
communications port on your desktop PC.
The HP Jornada 420 connects to the sync cable via the cradle.