Filter
Top Products
Dolphin® 7900 Series User’s Guide Rev D 7 - 3
Buttons
Buttons programs both keyboard buttons and the side buttons to launch applications or execute commands. The default button
assignments that appear on the Buttons window are inactive until you enable the HotKeys Power Tool.
To Enable HotKeys
1. Tap Start > Power Tools and tap the HotKeys icon once . HotKeys is enabled and the button assignments in the
Buttons setting are active.
2. Verify the assignment by tapping the button on the keyboard.
For more information about the HotKeys Power Tool, refer to the Dolphin Power Tools User’s Guide, which is available for
download from the web at www.handheld.com.
Button Assignments
By default, the side buttons (for locations, see page 3-6) activate the image engine but can be programmed to launch applications
or execute commands in the Buttons setting.
1. After HotKeys is enabled, tap Start > Settings > Personal tab > Buttons.
Note: The buttons that appear on this window are the only buttons that can be programmed via the Buttons setting. You cannot
add buttons to this window.
2. To change button assignment, tap on the name of the application in the Assignment column and select a program or
command in the Assign a program drop down list.
3. Tap OK to save.
Available Applications
The Assign a program list contains the applications installed on the terminal. If there is a program installed that you would like
to see in this list, paste a Shortcut to the program in the
\\Windows\Start Menu\Programs folder. For instructions about
creating shortcuts,
see Using File Explorer on page 7-5..
Additional Functions
The Assign a program list also contains the following commands:
Command Description
<Input Panel> Opens the soft input panel.