Hand Held Products 7900 PDAs & Smartphones User Manual


 
15 - 2 Rev D Dolphin® 7900 Series User’s Guide
Dock LED
Each terminal well displays a Dock LED on the front that lights solid green when a terminal is properly seated, which
means that the terminal and the base are connected.
Charge LEDs
Each terminal well displays a Charge LED on the front that lights green to indicate charging. For details, see
Charging Terminals in the ChargeBase on page 15-3.
Back Panel
Power Supply Connector
This connector receives input from the power adapter. Plug the power connector cable from the power adapter into
this connector. There is no ON/OFF switch on the back panel of the ChargeBase. The ON/OFF switch is on the
power adapter.
Power Supply
The Dolphin ChargeBase includes a power supply that contains a power adapter to ensure the proper voltage. The power adapter
plugs into standard AC/DC outlets.
Supplying Power to the ChargeBase
You must use the power adapter provided by Hand Held Products with the Dolphin ChargeBase. Using a non-Hand Held Products
power adapter voids your warranty and could result in serious damage to the circuitry of the Dolphin ChargeBase.
1. Be sure the power switch on the power adapter is in the OFF position.
Power Supply Connector
Power Cord
ON/OFF
Switch
ON Position
Power Adapter
Power
Connector
Cable
!