Filter
Top Products
PROCEDURES LBI-39169
69
The beginning of this output will list the number of objects in the database. There should be roughly three times the
number of EDACS elements.
2. Enter:
>
/usr/OV/bin/ovobjprint >
Filename
This will output the contents to a file called “Filename.”
3. The individual objects can be viewed in “Filename.”
14.12 VIEWING/MODIFYING EDACS IDENTIFIERS
To view/Modify that the EDACS identifiers are correctly associated with an icon, perform the following:
1. Select the icon using the left mouse button, and then select the Monitor ->Description->Selected Object menu item
from the OpenView main menu bar.
2. Choose the EDACS Identifiers attributes. The identifiers will be listed.
3. Press the View/Modify Object Attributes button.
OR
1. Select the icon, depress and hold down the right mouse button.
2. Move the mouse to the Describe/Modify Object...menu option and release the mouse button.
3. Select the EDACS Identifiers Object Attributes and press the View/Modify Object Attributes button.
14.13 VIEWING/MODIFYING TRAP SEVERITY LEVELS
Use the following procedure to view or modify trap severity levels.
1. Select the EDACS->Faults->Configuration menu item to invoke the OpenView event configuration.
2. Select the enterprise of the agent reporting the traps, and the traps defined for the agent will be displayed in the
middle window. The severity level will be displayed in the middle window along with the trap name. The first
characters of an EDACS trap name conventionally are an acronym of the device against which the trap is placed.
3. Select the event which has the severity level to change and choose the Modify button. A new window will pop up
with the severity levels in the lower right-hand corner.
4. Click on the severity button and a pulldown menu will display choices.
5. Select the OK button to exit this popup and click on the Apply button on the Event Configuration window for the
changes to take effect.
14.14 MODIFYING EVENT DESCRIPTIONS
To modify the event descriptions you must bring up the OpenView Event Configuration application.
1. Select EDACS->Fault->Configuration from the EDACS menu bar.