Filter
Top Products
RETRIEVING THE SOFTWARE VERSION LBI-39169
23
6. RETRIEVING THE SOFTWARE VERSION
The Software Version feature allows you to obtain the versions of software installed on the Network Manager platform
and software installed on directly connected devices and the devices they proxy for.
6.1 SUBCOMPONENT SOFTWARE VERSIONS
All software versions for the directly connected device and its subcomponents are available by using the following
procedure:
1. From the hierarchical map, select the icon representing the desired subcomponents.
NOTE:
If an icon is not selected, the EDACS->Software Version menu may be greyed out.
2. The Network Manager will respond with the Software Table screen showing the software versions of all devices (or
boards) directly connected to the selected device.
For example, the response to an inquiry about the software version of the CEC/IMC Manager includes the versions
of its boards as shown in Figure 6. The IP Address or host name of the directly connected EDACS device is listed in
the IP Address field.
3. Select the CLOSE button at the bottom of the screen to exit the Software Table screen.
Figure 6 - Software Version Screen Example
Part Number
The Part Number field identifies the Ericsson Part Number of the software. If the software is installed on
a ROM chip, then the part number will be preceded by the ROM’s reference designator (or location).
Major Version
The Major Software vision is an integer number representing the major software revision number, for
example the number “2” in 2.1.