Filter
Top Products
LBI-39169 PROCEDURES
66
14.5 ADDING SYMBOLS TO EDACS MAPS
Use the following procedure to add symbols to the EDACS Maps.
To drag a symbol onto an OpenView Network Node Manager Map,
1. Select the
EDIT-> Add Object
Menu item from the OpenView Network Node Manager main menu bar. An Add
Object Palette window appears.
2. Scroll through the Symbol Classes until the EDACS class appears.
3. Double click on the EDACS Symbol class and the individual EDACS symbols appear.
4. Position the mouse over the symbol of interest, press the middle mouse button, and drag the symbol onto the desired
map.
5. Depress the mouse, and the popup window appears.
6. Select the “EDACS Map Generation” attribute section and “Set Object Attributes.” Fill in the identifiers and any
other applicable fields. The Help button provides on-line help to for field meanings.
7. Follow the on-line OpenView NNM help to fill in the remaining window fields.
8. Notably, the selection name specifies the database key for the object represented by the symbol. Therefore, the
selection name must be unique for all objects. The one exception is the selection name for directly connected
EDACS elements - BCU/CAL, PI, EDG, System Manager, and CEC/IMC Manager. Directly connected elements
must have their selection name equal to the one found by IPMAP. IPMAP will use the host name by preference but
will use the IP Address if it cannot determine the Host Name.
After the symbol is added, it may need to be connected to another symbol using the Adding a Connection procedure,
which is presented below.
14.6 DELETING SYMBOLS
Use the following procedure to delete a symbol from the OpenView map.
1. Select the symbol with the left mouse button.
2. Select the
EDIT->Delete->From All Submaps
menu item from the OpenView main menu bar.
A Delete Object warning popup will appear.
To delete a symbol that has a submap, select
EDIT->Delete->From All Submaps
. Selecting
EDIT->Delete->From this
Submap
to delete a symbol will cause the symbols on the submap to be orphaned and remain in the OpenView database. To
access orphaned submaps, do
Edit->Submap
which will list all submaps, then perform the Deleting Orphaned Submaps
procedure.
14.7 ADDING A CONNECTION
When an EDACS icon is manually added for a directly connected EDACS element, the selection name must equal the IP
Address of the element. The following elements are directly connected EDACS elements: PI, BCU/CAL, CEC/IMC
Manager, and System Manager. This ties the EDACS icon with the EDACS capabilities to the object created by IPMAP, the
NOTE