Cisco Systems SPA504G Telephone User Manual


 
Using Advanced Phone Features
Using Star Codes on Cisco IP Phones
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 78
3
*70 Disable call waiting for a
single call.
When entering the star code, also enter the
phone number that you want to call. Then
press . Call waiting is disabled for
the duration of the call.
*71 Enable call waiting for a
single call. If a new call is
received during an active
call, a tone plays.
When entering the star code, also enter the
phone number that you want to call. Then
press . This feature is active for the
duration of the call.
*72 Enable Call Forward All.
Forwards all incoming
calls to the specified
number.
You will be prompted on the screen (or with
a tone on Cisco SPA301 and Cisco
SPA501G). Enter an extension or a phone
number. For an outbound call, include the
dialing prefix required to get an outside line,
as well as any long-distance prefix required
for your phone service. (No dialing prefix is
required on a shared line.)
This feature is active until you disable it.
*73 Disable Call Forward All.
*77 Enable anonymous call
blocking. Anonymous
calls will be ignored.
This feature is active until you disable it by
entering *87.
*78 Enable Do Not Disturb. This feature is active until you disable it.
*79 Disable Do Not Disturb.
*86 Disable Call Back.
*87 Disable anonymous call
blocking.
*96 Page an extension or
paging group.
You will be prompted on the screen (or with
a tone on Cisco SPA301 and Cisco
SPA501G). Enter the extension or paging
group extension that you want to page.
This feature is active until you disable it.
Note: If a phone is not set up to auto-answer
pages, the call will ring as a normal voice
call.
Enter: To do this: Notes
Dial
Dial