Filter
Top Products
Using Basic Phone Functions
Setting Do Not Disturb
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 44
2
Setting Do Not Disturb
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
• Calls to your personal extensions are forwarded to the specified Call
Forward Busy/No Answer number.
• Intercom calls and pages are blocked.
• Calls to shared extensions, shared lines, and hunt groups may be answered
by other users but will not ring your phone.
You can use star codes for this feature. For more information, see Using Star
Codes on Cisco IP Phones, page 76. On Cisco SPA301 and SPA501G, this
feature is available only by using the star codes.
Task Instructions
Enabling or disabling Do
Not Disturb by using the
softkey
• To enable: Press . The display screen
indicates that Do Not Disturb is turned on for
your phone.
• To disable: Press or .
Enabling or disabling Do
Not Disturb by using the
Setup menu
Cisco SPA50xG models
1. Press .
2. Select Preferences.
3. Scroll to Do Not Disturb, and then press .
4. Press to select Yes (DND is enabled) or
No (DND is disabled).
5. Press , and then press .
6. Press to close the menu.
Enabling or disabling Do
Not Disturb by using the
Setup menu
Cisco SPA525G/G2
1. Press .
2. Select User Preferences.
3. Select Call Preferences.
4. Select Do Not Disturb.
5. Press the right-arrow or left-arrow navigation
button to turn this feature On or Off.
6. Press .
Dnd
-Dnd
Clr DND
Edit
Y/N
OK
Save
Cancel
Save