Filter
Top Products
Using Advanced Phone Features
Enabling and Using Dial Assistance
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 66
3
Enabling and Using Dial Assistance
If you enable dial assistance, when you place calls, the screen will display phone
numbers based on the best matched entries in the Directory and Call History lists.
Not available on Cisco SPA301 or Cisco SPA501G.
Task Instructions
Enabling or disabling dial
assistance
Cisco SPA50xG models
1. Press .
2. Select Preferences.
3. Choose Dial Assistance, and then press
.
4. Press to choose Yes (dial assistance is
enabled) or No (dial assistance is disabled).
5. Press , and then press .
6. Press to close the menu.
Cisco SPA525G/G2
1. Press .
2. Select User Preferences.
3. Select Call Preferences.
4. Scroll to Dial Assistance.
5. Press the right-arrow navigation button to enter a
check mark (the feature is enabled) or to clear the
check mark (the feature is disabled).
6. Press .
Using dial assistance
If enabled
1. Begin dialing a number. The phone displays
similar numbers that you have dialed in the past.
2. Press the navigation button to scroll down.
3. When a number is selected, press to
complete the call.
Edit
Y/N
OK
Save
Cancel
Save
Dial