Cisco Systems SPA504G Telephone User Manual


 
Using Basic Phone Functions
Parking a Call
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 48
2
To unpark a call from a
list of parked calls
Cisco SPA525G/G2
1. Press .
2. Select Status.
3. Select Call Park Status.
4. Select the call that you want to unpark.
5. Select .
Parking and unparking a
call by using a call Park
Slot button
If configured
During a call, press the feature button for the Park
Slot. The call is placed on hold in the specified park
slot. To unpark the call, press the Park Slot button
again.
Other options for unparking the call:
If another user’s phone is configured with the
same button, such as Park Slot 1, you can
unpark the call from that phone.
Press on any IP phone, and then
enter the park slot number, such as 1.
Lift the receiver on any IP phone, and enter
. At the tone, press the park slot
number followed by .
Task Instructions
Unpark
Unpark
*
3
9
#