Filter
Top Products
5-18
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Chapter 5 Parameters and Defaults
MGCP Configuration Parameters
Range
1 to 4294967295
Default
10
Voice Configuration Menu Access Code
205
MGCPVer
Description
Enter the MGCP version string that the Cisco ATA should use when it powers on. The following values
are valid:
• MGCP0.1
• MGCP1.0
• NCS1.0
Note Spaces are not permitted in the MGCPVer parameter. The protocol string is case insensitive.
Value Type
Alphanumeric
Default
MGCP1.0
Voice Configuration Menu Access Code
206
Domain
Description
The Cisco ATA uses this parameter to determine how the domain-name portion of the endpoint identifier
is constructed. The following values are valid:
• Dot (.) or blank—Uses DHCP-provided IP address if available; otherwise use static IP address.
• +—Uses combination of Host Name and Domain Name returned by the DHCP server. If no
HostName is returned, uses the IP address with brackets.
• 0—Uses DHCP-provided domain name if available; otherwise use static IP address.
• *—Uses Cisco ATA MAC address.
• String—Uses specified string.
Value Type
Alphanumeric string