Filter
Top Products
5-2
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Chapter 5 Parameters and Defaults
Configuration Text File Template
–
IP address (e.g. 192.168.2.170)
–
Integer (32-bit integer)
–
Numeric digit string
Note The term Cisco ATA is used throughout this manual to refer to both the Cisco ATA 186 and the
Cisco ATA 188, unless differences between the Cisco ATA 186 and Cisco ATA 188 are explicitly
stated.
Note This section contains recommended values for the United States and other countries as configuration
examples for certain parameters. For detailed recommendations of tone-parameter values by country, see
Appendix D, “Recommended Cisco ATA Tone Parameter Values by Country.”
Configuration Text File Template
This is a listing of the mgcp_example.txt text file, without its annotations, that comes bundled with the
Cisco ATA software.
You can make a copy of this file and use it as a template for creating your own default configuration file
or Cisco ATA-specific configuration file. For instructions on how to create these configuration files, see
the “Creating Unique and Common Cisco ATA Configuration Files” section on page 3-9.
The mgcp_example.txt file contains all the Cisco ATA default values. A configuration file must begin
with #txt so that the formatting tool, cfgfmt.exe, treats the file as a text file. The sections that follow this
listing describe all the parameters in this file.
#txt
UIPassword:0
UseTftp:1
TftpURL:0
CfgInterval:3600
EncryptKey:0
upgradecode:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none
upgradelang:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none
Dhcp:1
StaticIp:0
StaticRoute:0
StaticNetMask:0
DNS1IP:0.0.0.0
DNS2IP:0.0.0.0
VLANSetting:0x0000002b
CA0orCM0:0
CA1orCM1:0
CA0UID:0
CA1UID:0
EPID0orSID0:.
EPID1orSID1:.
PrfCodec:1
LBRCodec:3
MGCPPort:2427
MediaPort:16384
RetxIntvl:500
RetxLim:10
MGCPVer:MGCP1.0
Domain:.