Filter
Top Products
5-12
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Chapter 5 Parameters and Defaults
MGCP Configuration Parameters
MGCP Configuration Parameters
This section describes the following parameters, which include Call Agent parameters:
• CA0orCM0, page 5-12
• CA1orCM1, page 5-13
• CA0UID, page 5-13
• CA1UID, page 5-14
• EPID0orSID0 and EPID1orSID1, page 5-14
• PrfCodec, page 5-15
• LBRCodec, page 5-15
• MGCPPort, page 5-16
• MediaPort, page 5-17
• RetxIntvl, page 5-17
• RetxLim, page 5-17
• MGCPVer, page 5-18
• Domain, page 5-18
CA0orCM0
Description
Specify the primary Call Agent in this parameter. This parameter must be an IP address or URL and may
include a port parameter. The default port number is 2727.
If you specify a port, you must separate the port number from the host IP address with a colon (:).
Examples
Examples of CA0orCM0 values follow:
• 192.168.1.2:2727
• ca.cisco.com.
Value Type
Alphanumeric string
Range
Maximum 31 characters
Default
0
Voice Configuration Menu Access Code
5