Filter
Top Products
Customizing Your Phone on the Web
Cisco Unified IP Phone 7960G and 7940G Phone Guide for Cisco Unified Communications Manager 7.0 (SCCP) 41
Customizing Your Phone on the Web
Your Cisco Unified IP Phone is a network device that can share information with other network
devices in your company, including your personal computer. You can use your computer to log in to
your Cisco
Unified Communications Manager User Options web pages, where you can control
features, settings, and services for your Cisco
Unified IP Phone. For example, you can set up speed-dial
buttons from your User
Options web pages.
Accessing Your User Options Web Pages
This section describes how to log in and select a phone device.
If you want to... Then do this...
Log in to your User
Options web pages
1. Obtain a User Options URL, user ID, and default password from your
system administrator.
2. Open a web browser on your computer, enter the URL, and log on.
3. If prompted to accept security settings, click Yes or Install Certificate.
The Cisco Unified CM User Options main web page displays. From this
page you can choose User Options to access User Settings, Directory
features, a Personal Address Book, and Fast Dials.
Or, to access phone-specific options, select a device (see below).
Select a device after
logging in
1. After you have logged in to your User Options web pages, choose User
Options > Device.
The Device Configuration page displays.
2. If you have multiple devices assigned to you, verify that the appropriate
device (phone model or Extension Mobility profile) is selected. If necessary,
choose another device from the Name drop-down menu.
From the Device Configuration page, you can access all of the various
configuration options available for your phone (other pages might not
provide access to all options).
–
Choose User Options to access User Settings, Directory, Personal
Address Book, and Fast Dials.
–
Choose toolbar buttons to access phone-specific options, such as line
settings, phone service settings, and speed dials.
To return to the Device Configuration page from another page, choose User
Options > Device.