Filter
Top Products
Advanced Call Handling
Cisco Unified IP Phone 7960G and 7940G Phone Guide for Cisco Unified Communications Manager 7.0 (SCCP) 31
Using Cisco Extension Mobility
Cisco Extension Mobility (EM) allows you to temporarily configure a Cisco Unified IP Phone as your
own. Once you log in to EM, the phone adopts your user profile, including your phone lines, features,
established services, and web-based settings. Your system administrator must configure EM for you.
Tips
• EM automatically logs you out after a certain amount of time. Your system administrators
establishes this time limit. \
• Changes that you make to your EM profile from your User Options web pages take effect
immediately if you are logged in to EM on the phone; otherwise, changes take effect the next time
you log in.
• Changes that you make to the phone from your User Options web pages take effect immediately
if you are logged out of EM; otherwise, changes take effect after you log out.
• Local settings controlled by the phone are not maintained in your EM profile.
Using BLF to Determine a Line State
Depending on configuration, you can use the Busy Lamp Field (BLF) feature to determine the state of
a phone line associated with a speed-dial button on your phone. You can place a call to this line,
regardless of the BLF status. This feature does not prevent dialing.
If you want to... Then...
Log in to EM 1. Choose > EM Service (name can vary).
2. Enter your user ID and PIN (provided by your system administrator).
3. If prompted, select a device profile.
Log out of EM 1. Choose > EM Service (name can vary).
2. When prompted to log out, press Yes.
If you want to... Then...
See the state of a
speed-dial line
Look for one of these indicators next to the line number:
Line is in-use.
Line is idle.
BLF indicator unavailable for this line.