Cisco Systems 7940G IP Phone User Manual


 
32 OL-15496-01
Using a Handset, Headset, and Speakerphone
You can use your phone with these audio devices: a handset, headset, or speakerphone.
The phone is off-hook when the handset is lifted or another audio device is in use.
The phone is on-hook when the handset is in its cradle and other audio devices are not in use.
Using a Handset
Using a Headset
Your phone supports four- or six-wire headset jacks for wired headsets.For information about
purchasing headsets, see
Headset Support, page 5.
You can use a headset in conjunction with all of the controls on your phone, including
and .
.
If you use AutoAnswer, see Using AutoAnswer with a Headset or Speakerphone, page 33.
If you want to... Then...
Go off-hook Lift the handset.
Go on-hook Replace the handset in the cradle.
Switch to the speakerphone or
headset during
Press or , then hang up the handset.
Adjust the volume level for a
call
Press during a call or after invoking a dial tone.
Press Save to preserve the volume level for future calls.
If you want to... Then...
Toggle headset mode on and off Press .
Switch to a handset Lift the handset.
Adjust the volume level for a
call
Press during a call or after invoking a dial tone.
Press Save to preserve the volume level for future calls.