Cisco Systems 7905G IP Phone User Manual


 
A-3
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Appendix A Additional Configuration Methods, Parameters, and Procedures
TFTP Configuring
Related Topics
About Profile Files, page A-3
Creating or Updating a Profile File, page A-4
Configuration Parameters, page A-11
About Profile Files
The TFTP server stores the common profile file lddefault.cfg and each
phone-specific profile file in binary format. The Cisco IP Phone 7902G profile file
name is ffxxxxxxxxxxxx, where each xx is the two-digit lowercase hexadecimal
representation of each integer in the phone’s MAC address. The
Cisco IP Phone models 7905G/7912G profile file name is ldxxxxxxxxxxxx, where
each xx is the two-digit lowercase hexadecimal representation of each integer in
the phone’s MAC address. The file name must be exactly 14 characters. For
example, if the MAC address is 0.1.45.2.10.20, the file name is ld00012d020a14.
Note Profile file names begin with “ld,” which is a lowercase “L” followed by a
lowercase “D.”
You can edit a profile file in text format on the TFTP server and then convert it to
the binary format required by the phone. See the “Creating or Updating a Profile
File” section on page A-4 for more information.
Configuration parameters are entered in the format “Parameter:value.” For
example, the following entry specifies that the password for accessing a phone’s
web page or Network Configuration screen is 12345: UIPassword:12345. See the
“Configuration Parameters” section on page A-11 for more information about
parameters and values.
Use the file example_uprofile.txt as a template for creating the text version of
your Cisco IP Phone profile files. You can obtain the latest version of this file
from the CCO website. It is included with the SCCP Software Package Zip file.
Note A profile file for your phone may contain some parameters that are not described
in this manual. These parameters are reserved for future use or are configured with
factory default settings and should not be changed.