6-6
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-23874-01
Chapter 6 Monitoring the Cisco Unified IP Phone Remotely
Network Setup
SW Port Setup Speed and duplex of the switch port, where:
• A—Auto Negotiate
• 10H—10-BaseT/half duplex
• 10F—10-BaseT/full duplex
• 100H—100-BaseT/half duplex
• 100F—100-BaseT/full duplex
• No Link—No connection to the switch port
PC Port Setup
(Cisco Unified IP Phone
6911 only)
Speed and duplex of the switch port, where:
• A—Auto Negotiate
• 10H—10-BaseT/half duplex
• 10F—10-BaseT/full duplex
• 100H—100-BaseT/half duplex
• 100F—100-BaseT/full duplex
• No Link—No connection to the PC port
User Locale User locale associated with the phone user. Identifies a set of detailed information to support
users, including language, font, date and time formatting, and alphanumeric keyboard text
information.
Network Locale Network locale associated with the phone user. Identifies a set of detailed information to
support the phone in a specific location, including definitions of the tones and cadences used
by the phone.
User Locale Version Version of the user locale loaded on the phone.
Network Locale Version Version of the network locale loaded on the phone.
PC Port Disabled
(Cisco Unified IP Phone
6911 only)
Indicates whether the PC port on the phone is enabled or disabled.
Speaker Enabled
(Cisco Unified IP Phone
6911 only)
Indicates whether the speakerphone is enabled on the phone.
GARP Enabled Indicates whether the phone learns MAC addresses from Gratuitous ARP responses.
Video Capability Enabled
(Cisco Unified IP Phone
6911 only)
Indicates whether the phone can participate in video calls when connected to an appropriately
equipped PC.
Voice VLAN Enabled Indicates whether the phone allows a device attached to the PC port to access the Voice
VLAN.
DSCP for Call Control DSCP IP classification for call control signaling.
DSCP for Configuration DSCP IP classification for any phone configuration transfer.
DSCP for Services DSCP IP classification for phone-based services.
Security Mode Displays the security mode that is set for the phone.
Table 6-2 Network Configuration Area Items (continued)
Item Description