Filter
Top Products
4-2
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-23874-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Accessing the Phone Configuration Settings
Accessing the Phone Configuration Settings
You can change the PIN of the IVR by navigating to Device > Device Settings > Common Phone
Profile, and specifying a password for the Local Phone Unlock Password field in the Common Phone
Profile Configuration page.
Note When there is no User ID and/or PIN associated with a phone, the phone uses a default PIN of 24726.
Related Topics
• Configuring Settings on the Cisco Unified IP Phone, page 4-1
Accessing the IVR and Configuring Your Phone Setting
To access the IVR and configure your phone settings, follow these steps:
Note You can change the PIN by using the Local Phone Unlock Password in the Common Phone Profile
Configuration page of the Cisco Unified CM Administration web page.
Procedure
Step 1 To access the IVR, go off-hook and press the *, #, and 0 buttons simultaneously. Alternatively on the
Cisco Unified IP Phone 6911, you can toggle the speaker button and press the *, #, and 0 buttons
simultaneously.
The IVR prompts for a password.
Note The Cisco Unified IP Phone 6901 and 6911 allow you to enter only numerical values for password.
Step 2 Enter the PIN by pressing the number keypad, followed by # button.
You are at the IVR main configuration menu.
Step 3 Follow the voice prompts on the IVR. Refer to Table 4-2 for information on navigating the IVR.
Step 4 To return to the main configuration menu, press #.
Subnet Mask Subnet mask used by the phone.
Default Router 1 Default router used by the phone (Default Router 1).
TFTP Server Primary Trivial File Transfer Protocol (TFTP) server used by the phone. If
you are not using DHCP in your network or you want to change this server,
you must assign the TFTP Server.
802.1 xSecurity Indicates whether the phone has 802.1x security enabled or disabled.
Table 4-1 Network Menu Options (continued)
Option Description