Filter
Top Products
Software Requirements
Issue 2.2 April 2005 41
● Verify that the 4600 Series IP Telephone package includes the following components:
- 1 telephone set.
- 1 telephone handset. Note that the 4622SW and the 4690 IP Conference Telephones do
not come with handsets.
- 1 H4DU 4-conductor coiled handset cord that is 9-foot long when extended, plugged into
the telephone and the handset. Not applicable for the 4622SW and 4690 IP Conference
Telephones.
- 1 Category 5 modular line cord for the connection from the IP telephone to the Ethernet
wall jack.
- 4600 Series IP Telephone Safety Instructions (555-233-779).
- Power Interface Module for the 4690 IP Conference Telephone only.
- Power Brick for 4630 IP Telephones only.
- Stylus for 4630/4630SW IP Telephones only.
● You might need a Category 5e modular line cord for the connection from the 4600 Series
IP Telephone to the PC.
Note:
Note: See the 4600 Series IP Telephone Installation Guide.
Software Requirements
The following software is required for 4600 Series IP Telephones to work properly:
● The DHCP server and application must be installed and properly administered, as
described in DHCP
on page 49.
!
CAUTION:
CAUTION: A DHCP server is not mandatory, but static addressing is necessary when a
DHCP server is unavailable. Because of difficulties associated with static
addressing, we very strongly recommend that a DHCP server be installed and
that static addressing be avoided.