Filter
Top Products
Issue 2.2 April 2005 39
Chapter 3: Requirements
Introduction
The 4600 Series IP Telephones use Internet Protocol (IP) technology with Ethernet line
interfaces. The IP telephones supplement the existing Avaya IP Solutions platform. This feature
provides the user with the capability to natively administer and maintain the new 4600 Series IP
Telephones.
The 4600 Series IP Telephones provide support for DHCP, TFTP, and HTTP over IPv4/UDP,
which enhance the administration and servicing of the phones. These phones use DHCP to
obtain dynamic IP Addresses and TFTP or HTTP to download new versions of software for the
phones.
Using the telephone’s built-in hub, the 4600 Series IP Telephones offer one desktop connection
for both the telephone set and the PC.
Hardware Requirements
Before plugging in the 4600 Series IP Telephone, verify that all the hardware requirements are
met. Failure to do so prevents the telephone from working and might have a negative impact on
your network.
The following hardware is required for 4600 Series IP Telephones to work properly.
Note:
Note: The recommended configuration is the latest PBX software and the latest IP
telephone firmware. In the event your site does not have the latest PBX software,
follow the recommendations in the table immediately below.