Filter
Top Products
Troubleshooting the 4601 IP Telephone
Issue 2.2 April 2005 121
Wrong Set
Type.
VISUAL INDICATION: Message Waiting indicators at top of phone and left
middle of faceplate display a broken flutter continuously (alternating 50
milliseconds on, 50 milliseconds off for 500 milliseconds followed by 500
milliseconds off) until either the “*” or “#” button is pressed.
CAUSE: The PBX does not recognize the set type.
RESOLUTION: Ensure the PBX is properly administered to expect the
appropriate telephone for the IP Address and extension. Press * to retry the
process using the same values or # to restart and re-enter the Extension
and Password.
Table 14: Possible Error Messages During 4601 IP Telephone Installation or
Operation (continued)
Error Message 4601 Visual Indication/Cause/Resolution
3 of 3