Filter
Top Products
Table 5-1. AT&T Door Phone Controller Option Selection Information
Mode Option/ Listen
Options
Listen
Verify
Press
For
Press
For
Default
Delay Before Door
To Select Option
00
Single 000 to 255 for 0 to 255 seconds Double
30 sec.
Ajar Call-back
Beep of delay after strike plate
Beep
To Verify
01
release stops until AT&T Door
Phone Controller calls back to
indicate that door is ajar
Ring/Chime
To Select Option
10
Single 24 (for 2 sec. on 4 sec. off Double
2 sec./
Cadence
Beep
cadence)
or
Beep
4 sec.
To Verify 11
15 (for 1 sec. on 5 sec. off
cadence)
Ring/Chime
To Select Option 20
Single 00 to 99 (0 to 99 second(s) Double
30 sec.
Duration
Beep
ring/chime)
Beep
To Verify
21
Door Unlock Code
To Select Option 30
Single 4 digits (first digit must be Double
6736
Beep
0,3,4,5,6,7 or 8;
Beep
“OPEN”
To Verify
31
remaining digits can be set from
0 to 9)
Door Unlock
To Select Option 40
Single 00 to 99 (door lock active time Double
4 sec.
Duration
Beep
in sec.)
Beep
To Verify 41
Enable Door Code
To Select Option 50
Single 1 Enable door code
Double
1
Beep 0 Disable door code
To Verify
Beep (Enabled)
51
Door Ajar Mode
To Select Option 50
Single 2 For callback after strike
Double
2
Beep plate release only
Beep
To Verify
51
3 For callback anytime
door is opened
Forced Disconnect
To Select Option 60
Single 10 to 255 (unit disconnects in
Double
120 sec.
Time-Out
Beep
10 to 255 sec.)
Beep
To Verify
61
Reset Options to
To Select Option 70
Single ## (to restore factory default
Double
N/A
Factory Defaults
Beep conditions)
Beep
To Verify
71
Phone Number
To Select Option
80
Single 0 to 20 numerical digits and
Double
#
Storage Memory 1
Beep
❊ ( ❊ = 2 second pause) #
Beep
To Verify
81
terminates entry
Phone Number
To Select Option 90
Single 0 to 20 numerical digits and
Double
#
Storage Memory 2
Beep
❊ ( ❊ = 2 second pause) #
Beep
To Verify
91
terminates entry
Installation - Dedicated Station Port 5-7