Filter
Top Products
4
Installation-Dedicated Trunk Port
4-1
4-1. DIP Switch Setting for PBX with Dedicated Trunk 4-3
Port
4-2a.
Connecting Door Phone Controller to Standard 4-4
Telephone Equipment
4-2b.
Using Modified Modular Cable for Ground Start
4-5
Installations
5
Installation-Dedicated Station Port
5-1
5-1.
DIP Switch Configuration for Telephone System 5-3
with Dedicated Station Access, Station Mode
5-2. Connecting the AT&T Door Phone Controller to a 5-4
Telephone System with Dedicated Analog Station
Port
6
Installation-No Dedicated Trunk/Station Port
6-1
6-1.
DIP Switch Setting for PBX With Shared Trunk Port 6-3
6-2. Connecting The AT&T Door Phone Controller to 6-4
a Telephone System With Shared Trunk Port
D Using the Door Phone Controller With An Answering
D-1
Machine
D-1.
Installation Method Used For Answering Only
D-2
Telephone Calls
D-2. Installation Method Used For Answering Both Door D-2
and Telephone Calls
E
Appendix-Auxiliary Alert Device Connections
E-1
E-1.
Connections For Auxiliary Alert Device
E-3
xi