Filter
Top Products
124
Setting mail rejection
When you receive a non-caller ID direct mail, you can reject the reception.
1 In standby mode, press
and
successively.
2 Turn the Easy Shuttle to select
“FUNCTION SET”.
3 Press , and turn the Easy
Shuttle to select “MAIL
REFUSE”.
4 Press , and turn the Easy
Shuttle to select “On”.
5 Press to set the function.
The normal display returns after a few
seconds.
Hints:
•
In step 2, you can also use the 4 button.
You do not need to press F/SELECT in
step 3.
•
In step 3, you can also use the 4 button.
You do not need to press F/SELECT in
step 4.
• In step 4, you can also use the numeric
button.
1: On
3: Off
You do not need to press F/SELECT in
step 5.
*PT-H99(AH)_07E 01.10.11, 9:17 PM124