Filter
Top Products
2928
Setting to vibration mode
PT-H99 has three modes, ringing, ringing and vibration, or vibration, to notify you of an
incoming call.
1 In standby mode, or during
communication, press
,
, and successively.
BELL: Ringing only (default)
VIBRATION: Vibration only
VIB & BELL: Ringing and vibration
2 Turn the Easy Shuttle to select
a mode icon, then press
.
Your PT-H99 vibrates for a few seconds
when you select “VIBRATION” or “VIB &
BELL”.
The normal display returns after a few
seconds.
Hint:
In step 2, you can also use the numeric
button.
1: BELL
2: VIBRATION
3: VIB & BELL
Display after your selection:
When you select “BELL”:
When you select “VIBRATION”:
When you select “VIB & BELL”:
Selecting the ringer style
You can set the ringer style to one of the 15 patterns for each public call with or without
number notification, private call, S-mail call, P-mail DX call, and data call. The following
procedure shows an example to set the ringer style for the private calls to pattern 05.
1 In standby mode, press ,
, and successively.
The ringer style setting display for the
public call with number notification is
displayed.
2 Turn the Easy Shuttle for the
call category you want to set.
Turn the Easy Shuttle downword twice
in this example, and the following display
will appear.
3 Press to enter the setting
mode.
4 Turn the Easy Shuttle to select
the tone pattern you want.
Each time you turn it, the selected tone
pattern will sound.
5 Press .
The normal display returns after a few
seconds.
Hints:
• In step 2, you can also use the numeric
button.
1: PUB WITH CLI
2: PUB NON CLI
3: PRIVATE
4: S-MAIL
5: P-MAIL DX
6: DATA MODE
You do not need to press F/SELECT in
step 3.
• In step 4, you can also use the numeric
buttons.
Press 0 and 5 buttons successively in
this example, and the tone pattern 05
will sound.
Factory settings:
When purchased, the PT-H99 ringer style is
set as follows:
• Public call with number
notification
01
• Public call without number
notification
02
• Private call 03
• S-mail call 04
• P-mail DX call 05
• Data call 08
*PT-H99(AH)_02E 01.10.11, 9:13 PM28-29