4746
Hints:
•
While recording or replaying voice label,
you can stop it by pressing F/SELECT.
• When you want to record the voice
label again, turn the Easy Shuttle to
select “RECORD”, and press
F/
SELECT
after step 3.
• You can also use the numeric button in
step 2.
1: RECORD
3: END
After pressing the 1 button, recording
starts.
Using the voice label
You can add a voice label (such as a name or others) to a phone number registered in the
Phone Book, and play it when you search the phone number. A maximum of 10 voice labels
can be recorded in the Phone Book. To do this, first enable the voice label function, then
register a phone number in the Phone Book.
To enable the voice label:
1 In standby mode, press ,
, and successively.
2 Turn the Easy Shuttle to select
“On”.
3 Press .
The normal display returns after a few
seconds.
Hints:
• To cancel the voice label, select “Off”
in step 2.
• You can also use the numeric button in
step 2.
1: On
2: Off
You do not need to press F/SELECT in
step 3.
To register in the Phone Book with
voice label:
1 Follow the steps on page 38
and steps 1 to 6 on page 39 to
register a name, phone number,
group, E-mail address, and
memo.
2 Press , and turn the Easy
Shuttle to select “RECORD”.
3 Press , and record a voice
label within 3 seconds.
Remaining time of recording
The voice label is replayed after
recording.
4 Press