Filter
Top Products
7372
To delete a created melody:
1 In standby mode, press ,
, and successively.
2 Turn the Easy Shuttle to select
a melody number.
3 Press , and turn the Easy
Shuttle to select “DELETE”.
4 Press to enter the delete
mode.
5 Press to delete the melody.
The normal display returns after a few
seconds.
6 Press repeatedly to set the
length of the note.
When you set a rest in step 5, press
repeatedly to set the length of the rest.
7 Turn the Easy Shuttle to set the
next note.
8 Repeat steps 5 to 7 to make a
melody.
9 Press to register the
melody.
10 Press to return to the
normal display.
Hints:
• Pressing INT/CLR/HOLD deletes the
current note, and pressing and holding
it deletes all the notes you entered.
• On the editing screen, you can press
to give an audition of melody.
• You can correct your melody after
audition. To edit your melody, follow
steps 1 to 3 and press F/SELECT, then
delete the note that you wish to correct
by pressing INT/CLR/HOLD after
selecting it using the Easy Shuttle, and
then enter a correct note.
• In step 3, you can also use the 1 button.
You do not need to press F/SELECT in
step 4.
Making an original melody as the ringer
Hints:
• In step 3, you can also use the 3 button.
You do not need to press F/SELECT in
step 4.
• In step 5, you can also use the 1 button.
*PT-H99(AH)_05E/02 01.10.11, 9:15 PM72-73