Aiwa PT-H99 Telephone User Manual


 
101100
Setting automatic display
When you set this function, not an indication but the S-mail itself is automatically displayed
when it arrives.
To set automatic display:
1 In standby mode, press
and .
2 Turn the Easy Shuttle to select
“AUTO DISPLAY”.
3 Press , and turn the Easy
Shuttle to select “On”.
4 Press to set the function.
The normal display returns after a few
seconds.
Hint:
In step 2, you can also use the 5 button.
You do not need to press F/SELECT in
step 3.
When an incoming S-mail arrives
The following display appears and the ringer
sounds twice.
Press and hold for one
second to return to the normal
display.
6 Press .
The normal display returns after a few
seconds.
Hint:
In step 2, you can also use the 3 button.
You do not need to press F/SELECT in
step 3.
Using preset message
*PT-H99(AH)_06E 01.10.11, 9:16 PM100-101