Aiwa PT-H99 Telephone User Manual


 
2524
Adjusting the volume
To adjust the ringer volume:
1 In standby mode, press ,
, and successively.
The current ringer volume level is
displayed.
OFF: No sound ( )
Volume 1: Quiet ( )
Volume 2: Normal ( )
Volume 3: Loud ( )
2 Turn the Easy Shuttle.
Upward: Increases the volume.
Downward: Decreases the volume.
After the adjustment, the phone rings at
the level you selected.
3 Press .
The normal display returns after a few
seconds.
To adjust the receiver volume:
During communication, turn the
Easy Shuttle.
Upward: Increases the volume.
Downward: Decreases the volume.
1: Lowest
2: Normal (Default)
3: Higher
4: Highest
The normal display returns after a few
seconds.
You can adjust both the ringer volume and the receiver volume.
Answering a call
1 Press and hold for one second or longer to power on and enter the
standby mode.
The following display appears.
For the display in the standby mode, see
page 14.
To prevent from accidental key operation,
you can lock the keys. (See page 26.)
2 When your phone rings, press .
You can talk with the calling party.
You can also press other numeric keys.
The number of the calling party is displayed.
If the calling party’s telephone number is registered in the phone book, the name is
displayed.
To end the call:
Press .
The PT-H99 displays the elapsed time of
the communication, and returns to the
standby mode.
To turn the power off:
Press and hold for one second or
longer.
Reception lamp blinks
during ringing.
*PT-H99(AH)_02E 01.10.11, 9:13 PM24-25