Filter
Top Products
Class of Service Override 81
Class of Service
Override
The Class of Service Override feature allows you to apply the features
of your own NBX telephone temporarily to another NBX telephone on the
same local network.
Example:
■ The telephones in your organization’s conference rooms are
configured so that long-distance telephone calls cannot be dialed
from it. You may, however, need to place a long-distance call during a
meeting. Using the Class of Service Override feature, you can apply
the features of your own telephone to the conference room telephone
for one call only and dial the call, assuming that your Call
Permissions allow you to make long-distance calls from your own
telephone.
If your system uses a messaging application other than NBX Messaging,
use the documentation for your messaging application instead of these
instructions.
To activate the one-call-only Class of Service Override from any NBX
telephone:
1 Pick up the handset.
2 Press the Feature button and 433.
3 Dial your telephone extension.
4 Dial your voice mailbox password and press #.
5 When you hear the dial tone, you can dial the call in the same way that
you do from your own NBX telephone.
When you use Class of Service (CoS) Override, any reports that are
generated on the NBX system indicate that the CoS features of your own
NBX telephone were applied temporarily to the telephone on which you
made the call.