Filter
Top Products
Off-Site Notification 75
8 To save the edited LabelMaker, click the Save button at the top of the
LabelMaker screen. Or you can click File > Save As to save the
LabelMaker to a new location.
To reuse your saved LabelMaker, you must run the file that you saved to
your computer. If you download the LabelMaker from the NBX NetSet
utility again, you get the default version, and the download might
overwrite your saved LabelMaker. To create a Windows Desktop shortcut
to your saved LabelMaker, right-click the saved file and then click
Send To > Desktop (create shortcut).
Off-Site
Notification
When you enable off-site notification, the NBX Messaging system notifies
you that you have received voice mail. You can then retrieve your
messages. Off-site notification consists of one cycle of up to five attempts
to reach you, one attempt for each Attempt row that you configure in the
Off-Site Notification screen.
If your system uses a messaging application other than NBX Messaging,
use the documentation for your messaging application instead of these
instructions.
To configure off-site notification for your NBX voice mailbox:
1 In NBX NetSet > NBX Messaging > Off-Site Notification, look for the
System and Group columns in the upper right corner. If the columns
show “Yes,” your system administrator has enabled off-site notification
for the NBX system and for the Class of Service group to which your
telephone belongs. If “No,” ask to have these features enabled.
2 Check Enabled.
3 If you want to be notified only about urgent voice mail messages, also
check Urgent Messages Only.
4 In the first Attempt row, in the Method drop-down list, select Pager,
VoiceMail, or EMail
The cycle of notice behaviors differs depending on the method that you
specify for the first attempt. See “Notice Behaviors”
later in this chapter.
5 In the Number/Address field:
■ If you selected Pager for Method in step 4:
■ Enter a pager number. Do not use parentheses, hyphens, or spaces.
Ask your administrator if you need to include the area code and
any other digits that your system needs to dial an outside number,