321 Studios F-560 Two-Way Radio User Manual


 
10-29SPECIAL FEATURES
1
2
3
4
5
6
7
8
9
10
11
12
13
A
SPECIAL FEATURES
Setting deletion of documents after transmission
(1) Press [Prev] or [Next], then press [Erase Tx Doc].
• When Erase Tx Doc has been set to [ON], the machine erases the document
from the box as soon as it sends it.
(2) Select either [ON] or [OFF], then press [Enter].
Entering an I.D. code
(1) Press [I.D.Code].
• You do not always need to register the I.D. code. Once you register it, how-
ever, entering the I.D. code is required in the following cases.
• When editing the box settings
• When storing documents in the box
• When printing the document stored in the box
Once entered, the I.D. code cannot be viewed. Be sure to remember this code.
To release the I.D. code, first enter the current registered I.D. code and then
enter “0000”.
(2) Enter the I.D. code (4 digits) using the numeric keys, then press [Enter].
• If you enter an incorrect character, press [Clear] to delete it and enter the
correct character.
9
To register another F-code box, press [Enter], then repeat from step 2 of “Regis-
tering or editing an F-code box” on page 10-22.
Press [Reset] to return to the standby mode.