62
Menu for SmartScan
In the menu mode (SYSTEM DATA - SMART SCAN), you can change several parameters
used for SmartScan.
• Bank lock
• Transfer speed
• Flow control setting
• Dial type
Bank Lock
SmartScanner will overwrite frequencies that you have already programmed into your
scanner. To save the previously programmed frequencies, you can lock out specific banks
prior to calling the database as follows:
To turn on this feature, enter into the menu mode.
1. Press
MENU
.
2. Select SYSTEM DATA using ▲, ▼ or VFO and pressing
E
,
SELECT
or VFO.
3. Select SMART SCAN using ▲, ▼ or VFO and pressing
E
,
SELECT
or VFO.
4. Select BANK LOCK using ▲, ▼ or VFO and pressing
E
,
SELECT
or VFO.
5. Press the bank numbers using the
1
-
9
and
0
key (for
bank 10) that you wish to lock out from programming so
that they will not be overwritten during the download.
6. Press
E
.
Transfer Speed
You can choose the following transfer speeds.
300, 2400, 4800, (9600), 19200 bps
9600 is the default.
Press
E
to exit.
BC780XLT1.qxd 10/08/2000 5:03 PM Page 62
