Filter
Top Products
32
Note: • CTCSS: Continuous Tone Coded Squelch System.
• DCS: Digital Coded Squelch.
• For example, the scanner shows the following displays.
• If the delay feature (-2 sec/-5 sec/-10 sec) has been set while in Tone search
mode, it resumes scanning according to the delay setting.
Additional Menu Options for Searching
Each of these additional menu options apply to all banks with search ranges entered. If
there is a bank that you do not want an option to apply, then simply press the bank number
on the numerical keypad. You will see the bank number that you have selected, disappears
from the display. (For more information on these options refer to the "Menu Descriptions"
section and "Additional Features" section.
Options:
RECORD (for more information see page 11)
1. Press
MENU.
2. Press
▲ or ▼ to select SEARCH EVENT and then press E.
3. Press
▲ or ▼ to select RECORD and then press E.
4. Set to
ON using ▲, ▼ or VFO and pressing E.
LINE is lit on the display.
ATTENUATOR (for more information see page 24)
1. Press
MENU.
2. Press
▲ or ▼ to select SEARCH EVENT and then press E.
3. Press
▲ or ▼ to select ATTENUATOR and then press E.
4. Set to
ON using ▲, ▼ or VFO and pressing E.
ATT is lit on the display.
DELAY
Refer to page 24.
Tone SQ on,
CTCSS 123.0 Hz setting
Tone Search,
CTCSS 67.0 Hz detecting
Tone Search,
DCS 023 detecting
Tone Search,
no signal receiving
Tone SQ on,
DCS 325 setting
Tone SQ on,
CTCSS & DCS non-setting