Toshiba ES96R Answering Machine User Manual


 
Using Stratagy ES with a Strata CTX
Call Forward
82 Stratagy ES User Guide 01/03
To use the Call Forward button sequence
Follow the instructions in Table 1 below shown under Button Sequence. Some
features require additional input, such as:
Destination If the destination is an outside number, press after entering the
destination. The CTX accepts destination numbers of up to 32 digits.
Timer This is a two digit entry representing how long (8 to 160 seconds) your
telephone should ring before forwarding the call. If you enter one digit, you
must press
after entering the single digit.
Also, in the following table, (Tone) means that a confirmation tone plays at that point
in the sequence.
Table 1 Call Forward Procedures
Feature Button Sequence
Call Forward - Station
Call Forward Any Call (Internal and Incoming Line)
All Call Press Extension button +
 (Tone) + Destination No. (Tone)
Busy Press Extension button +
 (Tone) + Dest. No. (Tone)
No Answer Press Extension button +
 (Tone) + Dest. No. (Tone) + Timer +
Busy No Answer Press Extension button +  + Dest. No. + Timer +
Cancel Press Extension button + (Tone)
Call Forward - System
Call Forward - Incoming Line Calls
All Calls Extension button +
 (Tone) + Dest. No. (Tone)
Busy Extension button +
 (Tone) + Dest. No. (Tone)
No Answer Extension button +
 + Dest. No. (Tone) + Timer (Tone) +
Busy No Answer Extension button +  + Dest. No. (Tone) + Timer (Tone) +
Cancel Extension button +  (Tone)
Call Forward - System
Activate
 (Tone)
Cancel
 (Tone)